Showing posts with label Army's Carbine Competition. Show all posts
Showing posts with label Army's Carbine Competition. Show all posts

Apr 30, 2011

Improved carbines headed your way - Army Times



Special ops model goes Army-wide; more weapons upgrades in the works

By Lance M. Bacon - Army Times Staff writer
Posted : Saturday Apr 30, 2011 9:46:41 EDT

Half a million soldiers will soon trade their M4 for an enhanced version of the Special Operations Command M4A1. The Army also will replace its 600,000 M16s with the enhanced M4A1 — or something better.
These are among a dozen changes that will provide soldiers a lighter and more lethal arsenal in the coming years.
M4 upgrades will start with SOCOM’s M4A1, which has a heavy barrel and automatic fire. The heavier barrel reduces warping and erosion, resulting in better performance and longer life. It also allows for a higher sustained rate of fire.
The Army is bettering SOCOM’s M4A1 by adding ambidextrous controls and improvements to the bolt, bolt carrier and forward rail to increase the carbine’s effectiveness and accuracy.
It will take about 10 years to retrofit the entire inventory, said Col. Douglas Tamilio, project manager for soldier weapons.
Replacing M16s will start in 2014 as the Army looks to “pure fleet” with carbines. The big question is whether the M4A1 or an entirely new weapon will be picked to replace the 600,000 M16s. Tamilio thinks a new carbine will emerge.
“I’m very positive in my outlook that the Army is going to see a new carbine,” he told Army Times. “I really think they’re going to.”
The Army is hosting a $30 million carbine competition to answer that question. All competitors must present their products by mid-August. No caliber restriction has been placed on new designs. They must be at least a 500-meter weapon and have a higher incapacitation percentage.

Weapons that meet production requirements will square off in 18 months worth of “extreme and extensive” tests. Two million rounds will be fired in myriad scenarios. Weapons will be tested to their destruction point and to determine whether they maintain accuracy throughout their life cycle — something the military has not tested before.
Some of the notable competitors include:
• Adaptive Combat Rifle by Remington.
• XCR by Robinson Armament.
• SCAR by FNH.
• M6A4 IAR, or similar variant, from LWRC.
• SR-16 by Knight Armament.
• CM901 by Colt.
When the dust settles, the winner will be measured against the $1,300 M4A1 to determine whether cost and capability warrants a new weapon. Most major manufacturers have carbines that cost less and offer improvements such as interchangeable barrel sizes and multiple calibers.

More weapons improvements

Better carbines are not the only firepower boost headed your way. The Army has a host of new and improved weapons scheduled to come on line in the coming years.
“Even with a diminishing budget, we’re pushing a lot of stuff to the field,” Tamilio said. “The next couple of years are going to be very busy with some significant advances.”
Some notable programs include:
• The XM25, or “Punisher,” as it is known in Afghanistan. The Army will put 36 into a battalion in the next 18 months. Fielding will begin in 2014. The total number is undecided, but estimates have stood as high as 12,500 — enough to put one in every squad.
The XM25 has a target acquisition system that calculates range with the push of a button. The data is transferred to an electronic fuse, enabling the 25mm round to explode over the target and rain shell fragments on the enemy.
All five prototypes were sent into theater in November, and the effects were immediate. Brig. Gen. (p) Peter Fuller, Program Executive Office Soldier, called it “a revolutionary weapon” and “a game-changer.” Tamilio said the weapons “performed flawlessly” and had no maintenance issues.
• The M26 modular shotgun. The Army plans to buy 35,000 M26s. The first made their way to units late last year — primarily to military police and engineers, Army officials said. But considering this modular system was largely driven by soldiers of the 10th Mountain Division, troops can expect to see it in close-quarters battle in the near future.
The shotgun weighs half as much as the Mossbergs soldiers now carry and can attach to the M4 in a matter of seconds. It has lethal, nonlethal and door-breaching capability, highlighted by a 3-inch, standoff adapter.
The 12-gauge is single-shot, which means less cleaning and fewer moving parts than one would see in a semiautomatic. The shotgun also comes with three- and five-round magazines that are easy to load, which allows soldiers to change shot selection in fairly short order.
It has a hydraulic butt stock to absorb recoil — a necessary add since the barrel is 7.75 inches. The size would be illegal on the streets, but provides a significant spray that is effective to 25 meters. That’s good news for any soldier who needs to clear a room with one shot.
• The XM2010 sniper rifle. The Army is likely to “pure fleet” its inventory, Fuller said. That means the Army would upgrade its 2,500 M24 sniper rifle chassis to XM2010s. An existing $28 million contract included the funds to allow manufacturer Remington to upgrade or produce 3,600 rifles over five years.
The weapon’s performance has been praised by snipers in Afghanistan, who received the first 250 rifles in December. Of note is the transition from the 7.62mm NATO caliber (.308 Winchester) to a .300 Winchester Magnum, which increased a sniper’s effective range from 800 to 1,200 meters.
• A new precision sniper rifle. Tamilio said he expects the Army to select and start fielding a new PSR in the next three to four years.
Remington, which has long owned the military sniper market, looks to keep its corner on that market with the Modular Sniper Rifle. Its primary competition will come from FNH, which recently unveiled the Ballista.
And the competition between these two will be tight.
Both weapons are modular and multicaliber, able to fire .338 Lapua Magnum, .300 Winchester Magnum and .308 (7.62 x 51mm NATO) calibers. In an era of diminishing defense dollars, the ability to train with the .308 for almost pennies on the round will be a must for any competitor. Both boast user-friendly designs driven by snipers. Both weigh about 17 pounds and both can put a serious dent in your medical record from 1,500 meters.
• An improved Common Remotely Operated Weapon Station, or CROWS. The Army is bumping the ceiling from 11,000 to 18,000 systems. It has 7,575 in service. A Feb. 16 recapitalization solicitation said the five-year contract will see production rates of up to 300 CROWS monthly, with the ability to surge to 500 for limited durations.
Operators can expect to see a significant increase in the weapon’s elevation in the coming year, Tamilio said. Other improvements may include an escalation of force kit, infrared pointer and 360-degree situational awareness with the day and night cameras.
• The XM806 lightweight .50-cal. Crews will see the much-anticipated machine gun by 2014, and possibly in late 2013, Tamilio said.
It cuts the weight of the 128-pound M2 by half and reduces recoil by 60 percent. It also boasts an effective range of 2,000 meters, 170 better than the M2. The machine gun, which has a manual safety, allows for quick barrel changes that do not require adjustments for headspace and timing.
The same safety and barrel-changing benefits will be available to the Army’s 54,000 M2 heavy machine guns, as well. The M2A1 quick change barrel will begin fielding by the end of this year, Tamilio said.
Relief also is on the way for A-gunners tapped to carry the tripod. The new XM205 weighs 13 pounds less than the 44-pound M3 they now carry. The XM205 collapses to less than 50 percent of deployed height.
• A modified M240 light medium-machine gun. This one will have a short barrel and collapsible butt stock, and will enter the force “shortly,” Tamilio said.
The titanium M240L replaced the M240B medium machine gun. It weighs 5.5 pounds less, and the 18 percent reduction does not compromise reliability or range. The M240L has smoother operation and a minimum 50,000-round receiver life.
• Lighter ammo. That’s good news for A-gunners who carry up to 30 pounds of ammo. Half that weight is contained in the shell. Engineers are looking to construct a stainless steel cartridge case that will reduce ammo weight by nearly 20 percent.
The Army’s Armament Research, Development and Engineering Center also is fielding a 5.56mm telescoped ammunition that uses a thin plastic casing instead of the traditional brass shell. This would reduce the weight by 42 percent.
“I’m really excited. There are a lot of good things coming in the small arms arena,” said Tamilio, who recounted how, as a private in 1981, he was given “an M60 that barely worked.”
“The Army is starting to realize that spending money on soldiers is a wise thing to do,” he said. “The future of our Army is going to be more centrally focused versus big, heavy equipment. We will see some great enhancements in terms of technology for our soldiers.”

Apr 20, 2011

Industry Squaring off for Army’s Carbine Competition


Story from Peo Soldier


On 30 March, nearly 40 weapons manufacturers packed into a hotel across the street from the Pentagon knowing that only one of them will prevail in the Army’s carbine competition to determine who makes the best carbine in the world. The group gathered to hear Army leaders answer questions regarding its full and open competition, which is slated to begin in May. The competition is part of the Army’s “Dual Path Strategy” to improve its M4 Carbine weapon system while simultaneously challenging industry to present a better carbine.


In his remarks to industry at the Army’s Carbine Competition pre-solicitation conference, Lt. Gen. Michael Vane, deputy commanding general, futures, and director, Army Capabilities Integration Center, U.S. Army Training and Doctrine Command, emphasized the importance of equipping small units in an era of persistent conflict stating, “The individual carbine is of critical importance in giving the Soldier the decisive edge in the close combat arena and it is a key component of an integrated Soldier and small unit system.”
“We must always seek the best available weapon systems and equipment for our Soldiers,” said Lt. Gen. William N. (Bill) Phillips, principal military deputy to the Assistant Secretary of the Army (Acquisition Logistics and Technology) addressing industry members. “They depend upon us and we cannot let them down. The Army can’t do it alone. Industry can’t do it alone. But when we work together, I believe we can do it in a most powerful way.”
The Army has fully funded the competition that supports the Army’s strategic emphasis to increase the capabilities of small units. In separate remarks, Lt. Gen. Michael A. Vane, deputy commanding general, futures, and director, Army Capabilities Integration Center, U.S. Army Training and Doctrine Command, emphasized the importance of equipping small units in an era of persistent conflict. Lt. Gen. Vane stressed that the future operational environment will exhibit uncertainty and complexity and result in the dispersion of the infantry squad on the battlefield.


“There are indications that gaps exist within the capabilities we require of our Soldiers and units,” said Lt. Gen. Vane. “The individual carbine is of critical importance in giving the Soldier the decisive edge in the close combat arena and it is a key component of an integrated Soldier and small unit system.”
The Army carbine competition is the first such contest for an Army service rifle in the past hundred years. The competition will determine the most effective, accurate, and reliable individual weapon available for the Soldier. Any weapon chosen in the competition would also feature better ergonomic features and be compatible with the current accessories and enablers (i.e. sights, grips, sensors, lasers, grenade launchers, etc).  The competition is fully funded through the “Research, Development, Testing & Evaluation” phase.
“The M4 is a world-class weapon that our commanders and Soldiers trust and in which we have the utmost confidence,” added Lt. Gen. Phillips. “Still, the Army has produced a new requirement to seek the best commercially available small arms weapon on today’s market.”
Col. Doug Tamilio, Project Manager Soldier Weapons, hosted the full day event in which a panel of acquisitions experts and program managers addressed approximately one hundred questions put forth by industry – from issues relating to the smallest details to big picture timelines. Col. Tamilio told the audience that the Army expects to release the final “Request for Proposals” (RFP) in May and will give each industry member 90 days to submit their single weapon design that they feel best meets the Army requirement. The competition phase is expected to last two years, although the time frames will vary based upon the number of entrants received and qualified for each phase.
After the completion of the first two test phases, the competition will enter a third “down select” phase where up to three finalists will be awarded contracts to produce limited numbers of test articles. The down select phase will include significant “user in the loop” testing where Soldiers will put the weapons through their paces in a limited user evaluation. The M4A1 will be tested alongside each of the competing designs in order to establish a baseline data set for performance comparison.  After determining the weapon that best meets the requirement, top Army leaders will conduct a business case analysis to determine if it is in the best interest of the Army to procure the winning carbine, and if so, what the ultimate fielding plan would be. Combined, there are currently about 1.1 million M16s and M4s in the Army inventory.
Regardless of the outcome, the combat-proven M4/M4A1 Carbine will remain in service for years to come. As part of its dual path strategy, the Army continues to move ahead with its M4 Product Improvement Program (PIP) that includes the conversion of M4s to M4A1s with heavy barrels and ambidextrous controls, the new standard for the Army carbine. Additionally, the Army plans to solicit industry for bolts, bolt carrier assemblies, and forward rail assemblies to determine if overall system performance can be improved.
“We will select a new carbine,” said Col. Doug Tamilio. “The question will be, do we execute the options on the contracts for how many we will buy and that depends upon the results of a business case analysis. We hope that we get the increases in accuracy and reliability to make the decision fairly easy.”
In his closing remarks, Lt. Gen. Phillips reminded the audience of what, ultimately, the key focus must be throughout the process.
“We must continually ask ourselves, what are we doing today for our Soldiers? What will we do tomorrow for our Soldiers to put the best capability into their hands?” said Lt. Gen. Phillips. “Because at the end of the day, that’s going to help save lives, allow Soldiers to complete their mission, and come home safely to their families and friends.”

Feb 28, 2011

Colt Modular Carbine CM901 7.62 x 51mm NATO



In January 31st, 2011 the US Army drafted a request for proposal for the Individual Carbine (IC), a possible replacement for the M-4 carbine now in use.  The goal is to find the best weapon for the best value, which means that they'll look for commercially developed platforms for this process.  It specifies that it must be flexible enough for future "enhancements for accuracy, lethality, reliability, signature suppression, ammunition improvements, maintenance and other weapon/accessory technologies."

With this in mind Colt Defense is debuting the CM901 Colt Modular Carbine, which according to Colt is the "ONLY SYSTEM" to offer a true user-level modularity to go from one caliber to another without tools or for any need to re-zero sights.  This is all done by just swapping uppers in different configurations.  This platform retains all of the familiarity of the old AR/M16 series but with improved ergonomics.

At the heart of the CM901 platform is the lower receiver that accommodates multiple calibers from the 7.62 x 51mm to anything in between the 5.56 x 45mm cartridge by way of a magazine adapter.  It is also compatible with any M4/M16 type upper!  It has several ambidextrous controls, such as the magazine release, bolt hold/release, and fire selector.  Additionally, the buffer tube assembly is compatible with both calibers, and available for customization with aftermarket stocks and pistolgrips common to the AR/M16 family.  The military/law enforcement version is capable of fully automatic fire.

The upper receiver is similar to the 6940/6941 monolithic upper Colt introduced a few years earlier.  It is a one piece monolithic upper with a full length picatinny rail with sides and bottom rails to mount additional accessories.  It also has a brass deflector and bolt-assist.  In addition, it comes standard with an adjustable folding front sight and a MATECH rear back-up iron sight.

The 7.62 x 51mm version is available in 13 or 16 inch barrel and operates in the gas direct impingement system, which according to Colt is as reliable as any piston system.  However, for the 5.56 x 45mm upper we are introduced to the all new Colt APC (Advanced Piston Carbine), which is a proprietary system that is supposed to be superior to other piston based AR's.  The 5.56 x 45mm is available in 10.3, 14.5, or 16 inch barrel.  Other improvements include hardened steel inserts in high wear areas of the aluminum alloy upper receiver.   Also, a new Advanced Bolt material and newly designed extractor and extractor spring to improve the bolt for longevity and reliability.

Well, we've been waiting a long time to see if Colt would ever respond to all those who've been demanding a better M4 Carbine.  And the CM901 is Colt's answer, it's an interesting one: piston and direct-impingement!  Personally, I like it, especially the dark earth anodizing on it, it just looks cool and hip, which is what sells these days.  But aside from that, Colt did a great job with rearranging the controls and putting a system that may just beat the others.  So, is the CM901 revolutionary?  Nah, more like evolutionary, everything feels so familiar; in my book that's good.  Time will tell if it'll make the cut as the next IC.  If not, it'll do well for civilians as Colt will release it by the end of this year with many calibers, including 6.8 SPC.  Job well done Colt!


CM901 7.62mm (14.5" Barrel) Specifications:


Caliber:  7.62x51mm NATO
Dry Weight:  9.4 lbs
Extended Length:  37.5"
Collapsed Length:  34.25"
Barrel Length:  16" (13" optional)
Barrel Type:  Forged, heavy barrel
Bore:  Chrome, 4 grooves, 1-12" twist, RH
Method of Operation:   Gas, direct system, locking bolt
Ambidextrous:  Yes, magazine release, bolt catch/release, fire selector switch, charging handle
Muzzle Velocity:  2,770fps
Effective Range:  700 meters
Front Sight:  Adjustable folding front
Cyclic Rate of Fire:  700-950 rpm
Fire Control:  Safe, semi, auto
Upper Receiver:  Flat top, monolithic upper receiver
Safe Maximum Operating Chamber Pressure:  70,000 PSI max
Accuracy Specification with M118:  Sub 2 MOA
Accuracy Specification with M118LR:  Sub 1 MOA


CM901 5.56mm (16" Barrel) Specifications:

Caliber:  5.56x45mm NATO
Dry Weight:  7.5 lbs
Extended Length:  35.25"
Collapsed Length:  32"
Barrel Length:  14.5", (10.3", 16" optional)
Barrel Type:  Broached, heavy barrel
Bore:  Chrome, 6 grooves, 1-7" twist, RH
Method of Operation:   Gas, Advanced Colt Piston
Ambidextrous:  Yes, magazine release, bolt catch/release, fire selector switch, charging handle
Muzzle Velocity:  2,785fps
Effective Range:  500 meters
Front Sight:  Adjustable folding front
Cyclic Rate of Fire:  700-950 rpm
Fire Control:  Safe, semi, auto
Upper Receiver:  Flat top, monolithic upper receiver
Safe Maximum Operating Chamber Pressure:  66,000 PSI max
Accuracy Specification with M855:  Sub 4 MOA