Showing posts with label US Army. Show all posts
Showing posts with label US Army. Show all posts

Feb 17, 2012

101st Airborne is Issued the M26 Shotgun




By Sgt. Joe Padula
2nd BCT PAO

FORT CAMPBELL, KY – It weighs 3.5 pounds, has a barrel length of 7.75 inches, fires 12-gauge shells and can be mounted on the M4 carbine or act as a stand-alone firearm; it is the M26 Modular Accessory Shotgun System and the 2nd Brigade Combat Team, 101st Airborne Division (Air Assault) is the first unit in the Army to be issued the combat enhancer.

“This is a new capability that is now in your hands for you to conduct your mission downrange,” said Col. Scott C. Armstrong, with Project Manager Soldier Weapons, during a presentation ceremony held at Fort Campbell’s Strike Academy, Feb. 7. “This is a big day, not just for the 2nd Brigade, but for the Army.”

Picatinny Arsenal-based PMSW is a group that supports Soldiers through the development, production, fielding and sustainment of current and future weapons systems. PMSW fielded the M26 MASS to the 2nd BCT, also known as the Strike Brigade due to the unit’s profile and future deployment schedule.

“We’re glad to be the first unit to put this weapon to work and there is an appreciation for all that goes into this,” said Col. Dan Walrath, the Strike commander, while holding the new Strike Shotgun.
After the ‘hand-over’ ceremony, the weapons were issued to Strike’s engineer company, Company A, 2nd Brigade Special Troops Battalion and Strike’s military police with Headquarters and Headquarters Company, 2nd BSTB. For three days, under the guidance of PMSW, the Strike Soldiers learned how to assemble, maintain, repair and effectively fire their new weapons.

“From the classroom instruction to employing the techniques taught at the M26 live-fire range, I was very impressed with the professionalism, motivation and skill of the Soldiers present,” said Maj. Vinson Morris, assistant product manager. “I have no doubt the 2nd Brigade Soldiers will seamlessly incorporate this new weapon into their current missions while benefiting from the weapon’s light weight and exceptional reliability.”
The Strike Soldiers who received and shot the weapons are welcoming to the new firearm into their arsenal, and see how its capabilities will help their missions.

“I can see this being very effective with the engineers for breaching and with the military police, especially since you can shoot ammunition that is non lethal,” said Sgt. Rhys McMahon, a combat engineer with Company A. “So far this is an amazing weapon; I’ve shot about 75 rounds and it works magnificently. This would have helped us out quite a few times when we were in Afghanistan.”

The Strike MP’s first sergeant, 1st Sgt. David Ward, is honored to have his teams utilize the new weapon system and attributes it partly to their accomplishments achieved in Operation Enduring Freedom 10-11.
“Since I have the brigade MP platoon in my company, I feel the initial deployment of these weapons to Strike is a testament to the service the Strike Soldiers have always exemplified, but most specifically in our last deployment into Afghanistan,” said Ward, talking about the brigade’s engineers and MPs. “Both of these elements of the brigade did some outstanding work in Afghanistan and it is nice to see them be the first to field the latest and greatest systems.”

PMSW has invested much time, money and manpower getting the future weapon into the hands of today’s Soldiers and can rest easy knowing those hands belong to Strike.






Sep 12, 2011

Firsts M2A1 .50 caliber machine guns delivered to the 1st Infantry Division



Project Manager Soldier Weapons personnel delivered the first M2A1 .50 Caliber Machine Guns ever fielded to the 1st Armored Division’s 3rd Infantry Brigade Combat Team ‘Bulldogs’ the week of 14 August at Fort Bliss, Texas. The upgraded guns incorporate significant lethality and safety improvements over the classic M2. Upgrades include a quick change barrel, fixed headspace and timing, and a new flash hider that reduces the weapon’s flash signature by 95 percent.

The fielding resulted from years of effort put forth by Army civilians like M2/M2A1 Product Director Laura Battista.

“Soldiers love the M2,” said Battista. “We didn’t want to change it. We wanted to make it better by making it safer and easier to use.”

Battista and her team spent the week with Bulldog Soldiers so they could take possession of the new guns and learn about the M2A1’s improved features over the M2, a Soldier favorite for decades.

“The M2A1’s fixed headspace and timing enhancement resolves the number one safety issue for Soldiers operating the weapon system,” said MAJ Ken Bernier, Assistant Product Manager for Crew Served Weapons. “The quick change barrel speeds target engagement and improves survivability and safety by reducing the time required to change the barrel. The result is that unit M2A1s will have near constant firepower and less downtime.”

During the Bulldog fielding event, MAJ Bernier also briefed the Under Secretary of Defense for Acquisition Technology and Logistics Dr. Ashton B. Carter on the M2A1’s capabilities. The Under Secretary was on hand to review the brigade’s readiness in advance of its deployment to Afghanistan. (Read VIP visit coverage in Fort Bliss Monitor)

The M2A1 program achieved Full Material Release (FMR) on 3 AUG 2011. FMR is the formal certification that the weapon system is safe, suitable, and supportable when used within stated operational parameters. The Army’s goal is to upgrade over 45,000 M2s in the fleet to the new M2A1 configuration at Anniston Army Depot (ANAD) in Alabama. Project Manager Soldier Weapons will provide ANAD with the Quick Change Barrel Kits needed to convert M2s into M2A1s. The Army has contracted with General Dynamics Armament and Technical Products to build 9,758 new M2A1s in addition to procuring conversion kits.

By PEO Soldier Live

Jul 16, 2011

Picatinny engineers lighten the load of Soldiers
Small Arms Technology has been used to develop lighter ammunition and a lighter machine gun.
Small Arms Technology has been used to develop lighter ammunition and a lighter machine gun.
By Eric Kowal
Picatinny Public Affairs


PICATINNY ARSENAL, N.J. - Any Soldier who has ever served as a Squad Automatic Weapon (SAW) gunner is resigned to the burden of lugging a heavy weapon and ammunition on patrol.

Soldiers may soon have a solution, one that cuts the weight of small arms ammunition nearly in half and provides a potential replacement for the SAW that weighs a whopping 8.3 pounds less than the current M249.

The weight reduction comes in the form of a new light machine gun and ammunition developed by engineers from the Lightweight Small Arms Technologies (LSAT) program.

The program is managed by the Joint Service Small Arms Program, which is part of the Armament Research, Development and Engineering Center (ARDEC) at Picatinny Arsenal.

"LSAT is all about reducing Soldier load," said Maj. Matt Bowler, a military advisor to the small arms program.

"We know that the Soldier is overburdened," he continued. "The Soldier carries too much weight so anything we can do to reduce Soldier load increases the Soldier's effectiveness, his capability on the battlefield and his survivability."

The weight reduction provided by the LSAT will have a significant impact for the SAW gunner, the most heavily burdened Soldier in the squad.

According to a study conducted in 2005, the average fighting load for the SAW gunner is 79 pounds. That is nearly twice the weight a Soldier should carry, according to Army doctrine.

Excess weight significantly affects the speed of maneuver of the SAW gunner and therefore the entire squad, which relies on suppressive fire from the SAW gunner to support its movement.

So how is such a tremendous weight reduction achieved? "We are using cased telescoped ammunition which uses a strong plastic case instead of a traditional brass case," said Kori Phillips, a systems management engineer with ARDEC.

Weight reduction for the weapon was achieved by designing the new weapon platform using the latest materials technologies as well as modeling and simulation to achieve minimal weight without compromising performance.

With a basic load of 1,000 rounds, the LSAT light machine gun (LMG) and its cased telescoped ammunition is 20.4 pounds lighter than a traditional SAW with the same amount of standard, brass-cased ammunition.

To try out the new lightweight ammunition and machine gun, a small group of Soldiers and members of the Army and Navy Senior Executive Service attended a live-fire demonstration in June at the Marine Corps Base in Quantico, Va.

One Soldier who appreciated the lack of brass during the live-fire demonstration was Maj. Gen. Nick Justice, Commanding General of the U.S. Army Research, Development and Engineering Command (RDECOM).

"I'm used to getting hot brass in my face since I am left-handed," Justice said.

The Army's chief scientist, Scott Fish, also attended the demonstration and tested the weapon first-hand. He later said he was extremely impressed and eager to learn more about the system.

As chief scientist, Fish identifies and analyzes technical issues and brings them to the attention of Army leaders. Additionally, he interacts with operational commanders, combatant commands, acquisition, and science and technology communities to address cross-organizational technical issues and solutions.

NO LOSS OF ACCURACY, LETHALITY

Sgt. Jason Reed of the Soldier System Center in Natick, Mass., demonstrated firing both the LSAT LMG and the SAW from various positions-from prone to kneeling to standing���while in full combat protective equipment.

"The difference between the two weapons is night and day," Reed said.

Before his assignment with Natick, Reed was assigned to 2nd Battalion, 325th Airborne Infantry Regiment in the 82nd Airborne Division and carried the SAW as an Automatic Rifleman for a total of two years, including a deployment to Iraq.

"The main thing I would take away from this is the weight issue, especially when firing in the standing position," Reed said. "Bringing up the SAW, especially if you have it up for a long duration of time, it starts to get the best of you and you have less accuracy on target."

Despite the significantly reduced weight of the LSAT LMG and its ammo, there is no degradation in accuracy or lethality.

"The cased telescoped ammo still provides the same muzzle velocity, range and accuracy as the brass-cased ammo," Phillips said. "We're not sacrificing lethality for weight. The plastic case does the same job."

In addition to significant weight savings, the LSAT is designed to provide other advantages over the current SAW. With a rotating chamber design, the cased telescoped light machine gun improves reliability.

"We've avoided the common problem of failure to feed and failure to eject," Phillips said. "In the current SAW system, that's one of the places where you primarily have failures and malfunctions."

The chamber is unique in that the cartridge goes straight through from feed to eject.

"With a regular SAW, or M249, the chamber and barrel is one piece," Phillips explained. "But in this new light machine gun, the chamber rotates back and forth. The system works in a cyclical pattern, so there's no interference."

Additionally, the rotating-chamber design provides better heat management. Combined with the insulating properties of the plastic ammo cases the LSAT LMG has potential to decrease the possibility of a cook-off or eliminate them altogether.

Another significant feature is the long-stroke, soft-recoil design, which provides a noticeable reduction in felt recoil over the current SAW. This significantly increases control, thus providing the shooter the ability to put more rounds on target and making the weapon much easier to fire from the standing position as a result of decreased muzzle rise.

THE FUTURE OF LSAT

Moreover, the LSAT LMG has one other unique feature that the current SAW lacks: the ability to switch to a semi-automatic mode. This feature increases the flexibility of the weapon, allows for the precise engagement of point targets, and helps to conserve ammunition in situations where full-automatic fire may not be necessary or desired.

In September, the weapon and ammunition will undergo a Military Utility Assessment that is intended to demonstrate the advantages that the LSAT LMG provides for the warfighter, as well as possibly influence the user community to develop a Capability Development Document.

A CDD is required before the system can transition to a program of record and enter the engineering and manufacturing development phase.

That is a significant milestone. It has taken six years to get from a concept to a fully functioning weapon that is ready to be evaluated by Soldiers.

MULTIPLE CALIBERS, PLATFORMS

Thus far, the ARDEC team, along with prime contractor AAI Corporation, has built four light machine guns and has test-fired more than 12,000 rounds of cased telescoped ammunition. They plan to have a total of eight weapons and produce more than 100,000 rounds in time for the assessment.

The LSAT development is much broader than just a new light machine gun. It is applicable to a broad range of calibers and platforms to include a carbine that also fires the lightweight cased telescoped ammunition.

The carbine is the same overall weight and length as the standard M4, but with its modified design, there is more than a one-inch gain in barrel length, which provides a slight increase in muzzle velocity over the current M4 Carbine.

Also under development is a caseless variant of the ammunition that provides a slightly greater weight savings and a significant decrease in volume, providing a 50 percent reduction in weight and a 40 percent reduction in volume compared to current brass.

Jul 11, 2011

M240L 7.62mm Medium Machine Gun (Light)




M240L and short barrels

The  M240B 7.62mm Medium Machine Gun is a variant of the M240 mounted on Bradley Fighting Vehicles and Abrams tank and has been reconfigured for ground applications with buttstock, bipod, iron sights, and forward rail assemblies.  It provides significantly improved reliability and more lethal medium support fire for ground units such as infantry, armor, field artillery, and combat engineers.  The M240B has a maximum effective range of 1,800 meters, a cyclic rate of fire of 650 rounds per minute, and a muzzle velocity of 2,800 feet per second.  The M240B has been fielded to units Army-wide and has become a critical weapon for units engaged in combat operations. 


U.S. Army Spec. Ian Speed, of Second Platoon, Delta Company, 1st Battalion, 4th Infantry Regiment, U.S. Army Europe, carries an M240-B machine gun as he patrols a village outside Combat Outpost Sangar in Zabul province, Afghanistan, June 27, 2010. (U.S. Army photo by Spc. Eric Cabral/Released)

Efforts to reduce the weight has finally been achieved with the new M240L.  It reduces Soldier combat load by decreasing the weight of the M240B without compromising performance. This 7.62mm medium machine gun incorporates titanium construction and alternative manufacturing methods for fabricating major M240B components to achieve significant weight savings. These improvements reduce the Soldier’s combat load while allowing easier handling and movement of the weapon. The M240L short barrel variant is 21.8 pounds, 5.4 pounds lighter than the M240B. The M240L is the program-of-record solution to reducing the weight of the M240B. The M240L meets all of the reliability and operational characteristics of the M240B and has an effective range of 1,800 meters. It is rugged and reliable and has a minimum 50,000-round receiver life.

According to Defense Industry Daily (6/16/11), FN Manufacturing received a $28.1 million, firm-fixed-price contract for 3,053 units of the M240L variant for the U. S. Army, which comes out to about $9,204 per gun.

M240L Medium Machine Gun Specifications:
Caliber:  7.62 x 51mm NATO
Action:  Gas-operated, automatic fire
Weight:  22.3 lbs.
Length:  48.5 inches (44.5 inches with short barrel)
Maximum Effective Range:  1,800 meters (area target)
Muzzle velocity:  2,800 ft per second
Tracer burnout:  900 meters
Cyclic Rate of Fire:  550-650 rounds per minute

(Info, specs, and pics PeoSoldier)

Jun 3, 2011

The Future US Army Soldier

Sci-Fi technology that the US Army is exploring for tomorrow's warriors...

May 19, 2011

Picatinny's Enhanced Performance Round as effective as M855 round - consistently



Picatinny���s Enhanced Performance Round as effective as M855 round - consistently
Staff Sgt. Jason Hopkins fires an M14 Enhanced Battle Rifle, using a 7.62mm M80 round against a 3/8 inch mild steel plate at 300 meters. The test firing was part of a demonstration to show the effectiveness of the 5.56mm M855A1 Enhanced Performance Round, or EPR, compared to rounds like the M80 and the M855, May 4, 2011, at Aberdeen Proving Grounds, Md. The EPR was the only round to penetrate the steel.
By Todd C. Lopez
Army News Service


Since June, the Program Executive Office for Ammunition at Picatinny Arsenal has fielded about 30 million of its new 5.56mm M855A1 "Enhanced Performance Rounds" in Afghanistan.

The cartridge, which has an environmentally-friendly copper core instead of the traditional lead, has been getting mostly good reviews in the 11 months since it first deployed to Operation Enduring Freedom.

"The vast majority of everything we've got back from the field is positive," said Lt. Col. Jeffrey K. Woods, PEO Ammunition's product manager, small caliber ammunition during an M855A1 "media day" at Aberdeen Proving Ground, Md., on May 4.

During the day-long media event reporters learned the benefits of the new cartridge, witnessed a demonstration of the round, compared to the round it is designed to replace, and had the opportunity to fire the round from both an M16 and M4 rifle.

Related Information about the Enhanced Performance Round

Perhaps the biggest plus of the M855A1 "enhanced performance round" is the consistency it brings to the fight -- more so than the 5.56mm M855 round it is designed to replace.
Woods and other officials were reticent to talk specifically about the effects of the new bullet, or any bullet, on a "soft target" -- a euphemism for enemy personnel. But what they made clear was the M855A1 is at least equal to the M855 on a soft target -- but that it did damage with more consistency.

The M855 is a good round, Woods said, but it is "yaw dependant." Like all bullets, it wobbles when it travels along its trajectory. Its effectiveness depends on its yaw angle when it hits a target. Not so with the M855A1. The new Enhanced Performance Round, or EPR, is not yaw-dependant -- it delivers the same effectiveness in a soft target no matter its yaw angle.

"On M855's best day, with that great performance that you will see, you're going to see that type of performance out of the EPR -- but you will see it every time," Woods said.

The EPR cartridge is the same length as the M855 that it's designed to replace, though the bullet it contains is about 1/8 of an inch longer. The weight and shape of the EPR is also the same as the M855, so it fits anything an M855 fits -- including the M16 and the M4 it was designed for.

The bullet itself has been redesigned completely. It features a larger steel "penetrator" on its tip, that is both sharper than what is on the M855 and is also exposed. Both bullets feature a copper jacket, but the EPR's jacket is "reverse drawn" -- part of its manufacturing. Perhaps the most notable feature of the EPR is that its bullet features a copper core, verses the M855's lead core.

There's also a new propellant in the EPR, designed to enhance its performance in the M4 Carbine rifle -- what most Soldiers are carrying today in Afghanistan.

The M4 has a shorter barrel than the M16 rifle, and barrel length is directly related to a bullet's velocity.

"The M855 leaving an M16 had a higher muzzle velocity than when it left the M4," Woods said. "Because the M16 is the longer barrel, you get the full burn of the powder, pushing a bullet to its maximum velocity before it left the barrel."

On an M4, however, the M855 bullet might leave the barrel before its powder is completely burned -- that means the bullet isn't getting the full benefit of all the powder contained in its shell and an increased muzzle flash.

"A longer-burning propellant is still burning when the round is leaving the barrel and you are going to get a brighter flash, which is obviously not good for Soldiers," Woods said.

Both of those issues have been addressed with the M855A1.

The SMP-842 propellant in the EPR burns quicker, ensuring less muzzle flash in the M4, and also meaning improved muzzle velocity.

The performance of the EPR against soft targets is the same as that of the M855 -- but it is more consistent. The new round is also "superior to 7.62mm M80 against soft targets," Woods said. But at the same time the new round is more Earth-friendly than both the M855 and the M80 -- it is also more effective than either of them against hard targets.

A test fire at Aberdeen Proving Ground range pitted the M855A1 round against the M855 and the M80 in multiple weapons -- the two 5.56mm rounds were fired in both the M4 and the M16, and the 7.62 M80 round was fired in an M14 Enhanced Battle Rifle. All three rounds are use today.

In all test firings against a sheet of 3/8-inch mild steel plate at 300 meters, the M855A1 came out on top.

Test center video also showed the EPR to be equally superior against concrete masonry units -- similar to cinder block. The M855A1 was able to penetrate such a block up to about 75 meters with the M16, and up to about 50 meters with the M4. The M855 was unable to penetrate the blocks at those ranges.

Wood said Soldiers have been told to turn in M855 cartridges and switch now to EPR. In February, he said, was the first time there's been more expenditure in theater with the EPR than with the M855.

The round is effective, Woods said, and testing at Aberdeen has shown that to be true -- against realistic testing targets. But the round can't be effective against enemy combatants unless Soldiers use it in their weapons -- and they need to trust that it works before they will want to use it.

Staff Sgt. Jason Hopkins, of the Maneuvers Center of Excellence, Fort Benning, Ga., has served four years in Afghanistan and two years in Iraq. He's seen combat, and confirms that while there he's used his weapon against "soft targets." He was one of the Soldiers at Aberdeen who test fired the new round -- and says he's convinced.

"We were a little skeptical -- like any change in the military, a little skeptical," Hopkins said of the EPR. "But coming up here and shooting it and seeing the performance of it -- I'm sold on it. The trajectory and the ballistics are just as good as the M855 and the penetration is far superior to the M855."

"It looks like just a more consistent round," he continued. "With the M855 you may not always get the same thing -- but everything we've seen with this EPR has been dead consistent every time."

As far as the new round's accuracy, Hopkins said, "It's on par if not better."

Woods said testing shows the EPR does produce a tighter shot group -- by about 2 inches at 600 meters.

As far as "stopping power" of the new round, Hopkins clarified what that term means to him -- and confirmed his faith that the round would do its job when he might be required to use it.

"Stopping power is incapacitation of a target so he cannot engage me or continue his mission," Hopkins said. "I haven't used the EPR in that situation yet, but I've used the M855. It's been effective. It's an effective round. But I truly believe the M855A1 will be more consistent."

Pvt. 1st Class Scott Lafferty, 1st Brigade, 82nd Airborne Division, has served once in Iraq. He was also a tester at Aberdeen. When he talks to other Soldiers about the effectiveness of the round, he said he's going to tell them what he learned during his test experience.

"I'm going to tell them how we've shot both different kinds of rounds and how the M855A1 is superior and they can test for themselves and find out," Lafferty said. He said that a weapon's effectiveness is largely dependent on a Soldier's training, but added, "I am confident the bullet will do what I've seen here today, and yesterday."

Apr 30, 2011

Improved carbines headed your way - Army Times



Special ops model goes Army-wide; more weapons upgrades in the works

By Lance M. Bacon - Army Times Staff writer
Posted : Saturday Apr 30, 2011 9:46:41 EDT

Half a million soldiers will soon trade their M4 for an enhanced version of the Special Operations Command M4A1. The Army also will replace its 600,000 M16s with the enhanced M4A1 — or something better.
These are among a dozen changes that will provide soldiers a lighter and more lethal arsenal in the coming years.
M4 upgrades will start with SOCOM’s M4A1, which has a heavy barrel and automatic fire. The heavier barrel reduces warping and erosion, resulting in better performance and longer life. It also allows for a higher sustained rate of fire.
The Army is bettering SOCOM’s M4A1 by adding ambidextrous controls and improvements to the bolt, bolt carrier and forward rail to increase the carbine’s effectiveness and accuracy.
It will take about 10 years to retrofit the entire inventory, said Col. Douglas Tamilio, project manager for soldier weapons.
Replacing M16s will start in 2014 as the Army looks to “pure fleet” with carbines. The big question is whether the M4A1 or an entirely new weapon will be picked to replace the 600,000 M16s. Tamilio thinks a new carbine will emerge.
“I’m very positive in my outlook that the Army is going to see a new carbine,” he told Army Times. “I really think they’re going to.”
The Army is hosting a $30 million carbine competition to answer that question. All competitors must present their products by mid-August. No caliber restriction has been placed on new designs. They must be at least a 500-meter weapon and have a higher incapacitation percentage.

Weapons that meet production requirements will square off in 18 months worth of “extreme and extensive” tests. Two million rounds will be fired in myriad scenarios. Weapons will be tested to their destruction point and to determine whether they maintain accuracy throughout their life cycle — something the military has not tested before.
Some of the notable competitors include:
• Adaptive Combat Rifle by Remington.
• XCR by Robinson Armament.
• SCAR by FNH.
• M6A4 IAR, or similar variant, from LWRC.
• SR-16 by Knight Armament.
• CM901 by Colt.
When the dust settles, the winner will be measured against the $1,300 M4A1 to determine whether cost and capability warrants a new weapon. Most major manufacturers have carbines that cost less and offer improvements such as interchangeable barrel sizes and multiple calibers.

More weapons improvements

Better carbines are not the only firepower boost headed your way. The Army has a host of new and improved weapons scheduled to come on line in the coming years.
“Even with a diminishing budget, we’re pushing a lot of stuff to the field,” Tamilio said. “The next couple of years are going to be very busy with some significant advances.”
Some notable programs include:
• The XM25, or “Punisher,” as it is known in Afghanistan. The Army will put 36 into a battalion in the next 18 months. Fielding will begin in 2014. The total number is undecided, but estimates have stood as high as 12,500 — enough to put one in every squad.
The XM25 has a target acquisition system that calculates range with the push of a button. The data is transferred to an electronic fuse, enabling the 25mm round to explode over the target and rain shell fragments on the enemy.
All five prototypes were sent into theater in November, and the effects were immediate. Brig. Gen. (p) Peter Fuller, Program Executive Office Soldier, called it “a revolutionary weapon” and “a game-changer.” Tamilio said the weapons “performed flawlessly” and had no maintenance issues.
• The M26 modular shotgun. The Army plans to buy 35,000 M26s. The first made their way to units late last year — primarily to military police and engineers, Army officials said. But considering this modular system was largely driven by soldiers of the 10th Mountain Division, troops can expect to see it in close-quarters battle in the near future.
The shotgun weighs half as much as the Mossbergs soldiers now carry and can attach to the M4 in a matter of seconds. It has lethal, nonlethal and door-breaching capability, highlighted by a 3-inch, standoff adapter.
The 12-gauge is single-shot, which means less cleaning and fewer moving parts than one would see in a semiautomatic. The shotgun also comes with three- and five-round magazines that are easy to load, which allows soldiers to change shot selection in fairly short order.
It has a hydraulic butt stock to absorb recoil — a necessary add since the barrel is 7.75 inches. The size would be illegal on the streets, but provides a significant spray that is effective to 25 meters. That’s good news for any soldier who needs to clear a room with one shot.
• The XM2010 sniper rifle. The Army is likely to “pure fleet” its inventory, Fuller said. That means the Army would upgrade its 2,500 M24 sniper rifle chassis to XM2010s. An existing $28 million contract included the funds to allow manufacturer Remington to upgrade or produce 3,600 rifles over five years.
The weapon’s performance has been praised by snipers in Afghanistan, who received the first 250 rifles in December. Of note is the transition from the 7.62mm NATO caliber (.308 Winchester) to a .300 Winchester Magnum, which increased a sniper’s effective range from 800 to 1,200 meters.
• A new precision sniper rifle. Tamilio said he expects the Army to select and start fielding a new PSR in the next three to four years.
Remington, which has long owned the military sniper market, looks to keep its corner on that market with the Modular Sniper Rifle. Its primary competition will come from FNH, which recently unveiled the Ballista.
And the competition between these two will be tight.
Both weapons are modular and multicaliber, able to fire .338 Lapua Magnum, .300 Winchester Magnum and .308 (7.62 x 51mm NATO) calibers. In an era of diminishing defense dollars, the ability to train with the .308 for almost pennies on the round will be a must for any competitor. Both boast user-friendly designs driven by snipers. Both weigh about 17 pounds and both can put a serious dent in your medical record from 1,500 meters.
• An improved Common Remotely Operated Weapon Station, or CROWS. The Army is bumping the ceiling from 11,000 to 18,000 systems. It has 7,575 in service. A Feb. 16 recapitalization solicitation said the five-year contract will see production rates of up to 300 CROWS monthly, with the ability to surge to 500 for limited durations.
Operators can expect to see a significant increase in the weapon’s elevation in the coming year, Tamilio said. Other improvements may include an escalation of force kit, infrared pointer and 360-degree situational awareness with the day and night cameras.
• The XM806 lightweight .50-cal. Crews will see the much-anticipated machine gun by 2014, and possibly in late 2013, Tamilio said.
It cuts the weight of the 128-pound M2 by half and reduces recoil by 60 percent. It also boasts an effective range of 2,000 meters, 170 better than the M2. The machine gun, which has a manual safety, allows for quick barrel changes that do not require adjustments for headspace and timing.
The same safety and barrel-changing benefits will be available to the Army’s 54,000 M2 heavy machine guns, as well. The M2A1 quick change barrel will begin fielding by the end of this year, Tamilio said.
Relief also is on the way for A-gunners tapped to carry the tripod. The new XM205 weighs 13 pounds less than the 44-pound M3 they now carry. The XM205 collapses to less than 50 percent of deployed height.
• A modified M240 light medium-machine gun. This one will have a short barrel and collapsible butt stock, and will enter the force “shortly,” Tamilio said.
The titanium M240L replaced the M240B medium machine gun. It weighs 5.5 pounds less, and the 18 percent reduction does not compromise reliability or range. The M240L has smoother operation and a minimum 50,000-round receiver life.
• Lighter ammo. That’s good news for A-gunners who carry up to 30 pounds of ammo. Half that weight is contained in the shell. Engineers are looking to construct a stainless steel cartridge case that will reduce ammo weight by nearly 20 percent.
The Army’s Armament Research, Development and Engineering Center also is fielding a 5.56mm telescoped ammunition that uses a thin plastic casing instead of the traditional brass shell. This would reduce the weight by 42 percent.
“I’m really excited. There are a lot of good things coming in the small arms arena,” said Tamilio, who recounted how, as a private in 1981, he was given “an M60 that barely worked.”
“The Army is starting to realize that spending money on soldiers is a wise thing to do,” he said. “The future of our Army is going to be more centrally focused versus big, heavy equipment. We will see some great enhancements in terms of technology for our soldiers.”

Apr 22, 2011

XM2010 arrives in Afghanistan

U.S. Army Staff Sgt. Dennis Long, a mechanic with Headquarters and Headquarters Company, Brigade Special Troops Battalion, 2nd Brigade Combat Team 34th Infantry Division, Task Force Red Bulls, and a native of Williamsburg, Iowa, fires an XM2010 Sniper Rifle on Bagram Air Field, Afghanistan, April 8. The XM2010 is a new Army-purchased weapon being distributed to sniper teams operating in Afghanistan.




(Story and photos by Sgt. Grant Matthes)   BAGRAM AIR FIELD, Afghanistan – Sniper instructors displayed the new XM2010 Sniper Rifle at Bagram Air Field, Afghanistan, April 9 to allow service members to look at, shoot and familiarize themselves with the weapon system.

The XM2010 is a .30 caliber bolt-action rifle with a folding stock, a rail system capable of mounting multiple weapon accessories and uses box magazines that house five rounds.

“They are currently being distributed one per sniper team,” said U.S. Army Maj. Tracy Kreuser, Intelligence and Sustainment Company, Headquarters and Headquarters Battalion, 101st Airborne Division force management chief and the division chemical officer. “You don’t want the enemy to know you’re a sniper, so they added the folding butt stock to make it look more like a regular rifle.”

The XM2010 is a rebuild of the M24 Sniper Rifle and is a good addition to the sniper’s arsenal, said Kreuser, a native of Kenosha, Wis.

“They listened to snipers when they built it, so they took everything into effect,” said U.S. Army Staff Sgt. David Dickson, Company C, 2nd Battalion, 29th Infantry Regiment sniper instructor, and a native of Southern Pines, N.C. “You can shoot a 10-inch shot group from 1,000 meters.”

The XM2010 will be assigned to sniper teams in Afghanistan before it is distributed to the rest of the Army.

“It is very smooth when shooting the rifle, the scope makes it really easy to accurately hit the target,” said U.S. Army Staff Sgt. Dennis Long, Headquarters and Headquarters Company, Brigade Special Troops Battalion, 2nd Brigade Combat Team 34th Infantry Division, Task Force Red Bulls, and a native of Williamsburg, Iowa.

“It’s a good system and I am very pleased it was able to be distributed so quickly,” said Kreuser. “It’s another system that will help us push the enemy back.”

U.S. Army Maj. Tracy Kreuser, Intelligence and Sustainment Company, Headquarters and Headquarters Battalion, 101st Airborne Division force management chief, and a native of Kenosha, Wis., fires an XM2010 Sniper Rifle on Bagram Air Field, Afghanistan, April 8. The Army is distributing the newly purchased weapon to sniper teams operating in Afghanistan.

























Ads

Marines to get new underwear to protect against attacks in Afghanistan

"The shorts are designed to prevent dirt and debris from entering wounds caused by improvised explosive devices, a favorite weapon of the Taliban."

by the LA Times, Read the article...


Or if you can't wait to protect your family jewels, you can purchase these here...

New helmets and new protective gear




WASHINGTON (Army News Service, April 20, 2011) -- The results of a year-long study to build the best helmet to withstand blunt trauma were unveiled at a Pentagon press briefing April 19, 2011.

Funded by the U.S. Army and the Joint IED Defeat Organization, the study found that the Advanced Combat Helmet, or ACH, continues to be the Soldiers' best protection.


The main objectives of the study, undertaken by Lawrence Livermore National Laboratory, were to gain insight on how the helmet pads protect against impact-induced traumatic brain injury, or TBI, and find better ways to protect Soldiers.


"There are three things we're trying to provide our Soldiers," said Brig. Gen. Peter Fuller, program executive officer at PEO Soldier, "protection from blasts, such as the blast wave experienced in the body; blunt or impact trauma when the body is slammed up against the interior of a vehicle following an IED explosion; and ballistics -- being hit by bullets and fragments."

Program Executive Office Soldier was created by the Army with one primary purpose: to develop the best equipment and field it as quickly as possible so Soldiers remain second to none in missions that span the full spectrum of military operations.


"We were asked to compare the impact response of NFL football pad systems and pad materials with the Army pad systems," said William Moss, co-author of the report at Lawrence Livermore National Laboratory, and directed by the Joint IED Defeat Organization.


Because blast-induced traumatic brain injury is one of the most common military injuries in Afghanistan and little is known about how personal protective equipment can deflect the impact of an IED, Army Vice Chief of Staff Gen. Peter Chiarelli directed JIEDDO to review the mitigation capabilities of the ACH against impact injuries in 2009.


The Army pad systems tested were the Team Wendy pads, in use since 2005, and the Oregon Aero pads, prior to that date.


The key findings showed that neither the NFL systems (Riddell and Xenith) nor Oregon Aero outperformed the Team Wendy pads in militarily-relevant impact scenarios in ACH helmets (at impact speeds from 10 to 20 feet per second).


"We found that for a small increase in pad thickness, there was an enormous effect on impact mitigation," Moss said. The current pad is three-quarters of an inch thick. The study indicated this improved effect occurred by adding one-eighth to one-quarter of an inch of foam.


This brought up another problem, though. By adding thicker pads, the helmet had to increase in size which meant an increase in weight, something no Soldier wants.


"Helmets have to let Soldiers do their job. They have to shoot, move, communicate, and concentrate in order to remain lethal and be able to operate in any environment," said Col. Bill Cole, project manager for Soldier Protection and Individual Equipment at Program Executive Office Soldier, Fort Belvoir, Va.


"Soldiers are very sensitive to weight, especially on their head, and that's what we see in feedback on all of our equipment, 'Hey, we love the fact that it saves lives, but anything to reduce weight, please do it,'" Cole said.


Bigger helmets can often be unstable, especially when wearing night vision goggles off the front end of the helmet.


Another result of the study showed that every head shape and size was different. This meant that helmets need to be fitted better, something that Natick Soldier Research, Development and Engineering Center in Natick, Mass., is developing.


"Soldiers should receive the proper size helmet with the proper size pads to accommodate those differences in head shapes," said Mike Codega, technological program manager at Natick.


"The solution is a holistically new helmet that incorporates this new knowledge about helmet pads with one of our new capabilities, a laser-scanning technology that will allow us to laser scan a great population to understand the differences in head shape," Codega said.


For the past six months, though, the Army has been able to offer a one-inch-thick pad to give better fit in the front and back or on the sides for slightly shorter or narrower heads.


"The ability to get a good-fitting helmet is crucial for Soldiers to be able to do their job," Cole said.


He pointed out the pronounced contour around the ear.


"This is needed for hearing, but it's rather difficult to manufacture in that contour and still maintain the ballistic capabilities we want in our helmets to make sure they can stop the bullets and fragments the way they're supposed to.


"So we're toying with new shapes where we can smooth out that contour and possibly shape the interior of the helmet shell differently, so we can incorporate larger pads of needed," Cole said.


Cole also said that proper fit procedures are being re-emphasized.


"We have calipers and tape and manuals to make sure Soldiers get the right-size helmet for their head, and we're also putting the word out in the field that any Soldiers who might have bought commercial pads that are less than three-quarters of an inch should be taken out and thrown away.


"You need at least three-quarters of an inch to get good protection. If your head is shaped so you need to use the one-inch pad to get proper fit, that's even better," Cole said.


"There are three things we are doing," Fuller said. "Because we'll never stop improving the protective gear Soldiers wear, we're getting ready to put out a solicitation for a new helmet pad.


"And we're putting helmet sensors, called Generation 2, in our helmets, to help us gather more data to feed into the medical community as they record the G forces that are a part of the Soldier's experience during blunt trauma and blast events. These will be deployed later this summer with six brigades," Fuller said.


Finally, last summer, Soldiers were given a new enhanced combat helmet, a co-effort with the Marine Corps, which increased ballistic protection. This new, thicker shell is composed of high molecular-weight polyethylene, as opposed to the Kevlar in the ACH


"The number-one issue we had was 'don't increase ballistic protection and increase the weight at the same time.' So we came in with increased protection at the same weight of our current helmet," Fuller said.


Protective gear is a complex problem, Fuller said.


"If we thought a larger helmet would immediately protect you, we'd go do it. But I want to reinforce that we're focusing on our Soldiers. We're trying to figure out what is going on, how do we help them, how do we mitigate," he said.


Understanding the interface between the physics of blunt protection and the human body, specifically the head, he said, is what the Army is pursuing.


"I don't understand what's happening inside your head, but if I can at least capture the data of what happened to your helmet which was attached to your head, during a traumatic event, whether it's blunt, blast or ballistic, we can then provide this information back to the medical community so they can understand it," Fuller said.

Apr 21, 2011

Check out What Really Happened at Wanat | U.S. Naval Institute


This article was published last July, and it describes why many M-4's failed.  It puts into perspective its design limitation and the need for proper and realistic training with it...

"By Kirk Ross, Proceedings Magazine

Some press accounts have placed blame for M4 carbine malfunctions at the Battle of Wanat, Afghanistan, squarely on the weapon's manufacturer. In fact, other factors could have led to the disaster there..."
Read more...

Marksmanship Matters



From American Rifleman
Without trying very hard, you can start a dandy argument about U.S. Army marksmanship training. The sub-genres include 7.62 versus 5.56, and M14 versus M4/M16. But let’s put aside the hardware for a moment and focus on the most immediate concern: how the Army trains soldiers for infantry combat...
Read more...

Apr 20, 2011

Industry Squaring off for Army’s Carbine Competition


Story from Peo Soldier


On 30 March, nearly 40 weapons manufacturers packed into a hotel across the street from the Pentagon knowing that only one of them will prevail in the Army’s carbine competition to determine who makes the best carbine in the world. The group gathered to hear Army leaders answer questions regarding its full and open competition, which is slated to begin in May. The competition is part of the Army’s “Dual Path Strategy” to improve its M4 Carbine weapon system while simultaneously challenging industry to present a better carbine.


In his remarks to industry at the Army’s Carbine Competition pre-solicitation conference, Lt. Gen. Michael Vane, deputy commanding general, futures, and director, Army Capabilities Integration Center, U.S. Army Training and Doctrine Command, emphasized the importance of equipping small units in an era of persistent conflict stating, “The individual carbine is of critical importance in giving the Soldier the decisive edge in the close combat arena and it is a key component of an integrated Soldier and small unit system.”
“We must always seek the best available weapon systems and equipment for our Soldiers,” said Lt. Gen. William N. (Bill) Phillips, principal military deputy to the Assistant Secretary of the Army (Acquisition Logistics and Technology) addressing industry members. “They depend upon us and we cannot let them down. The Army can’t do it alone. Industry can’t do it alone. But when we work together, I believe we can do it in a most powerful way.”
The Army has fully funded the competition that supports the Army’s strategic emphasis to increase the capabilities of small units. In separate remarks, Lt. Gen. Michael A. Vane, deputy commanding general, futures, and director, Army Capabilities Integration Center, U.S. Army Training and Doctrine Command, emphasized the importance of equipping small units in an era of persistent conflict. Lt. Gen. Vane stressed that the future operational environment will exhibit uncertainty and complexity and result in the dispersion of the infantry squad on the battlefield.


“There are indications that gaps exist within the capabilities we require of our Soldiers and units,” said Lt. Gen. Vane. “The individual carbine is of critical importance in giving the Soldier the decisive edge in the close combat arena and it is a key component of an integrated Soldier and small unit system.”
The Army carbine competition is the first such contest for an Army service rifle in the past hundred years. The competition will determine the most effective, accurate, and reliable individual weapon available for the Soldier. Any weapon chosen in the competition would also feature better ergonomic features and be compatible with the current accessories and enablers (i.e. sights, grips, sensors, lasers, grenade launchers, etc).  The competition is fully funded through the “Research, Development, Testing & Evaluation” phase.
“The M4 is a world-class weapon that our commanders and Soldiers trust and in which we have the utmost confidence,” added Lt. Gen. Phillips. “Still, the Army has produced a new requirement to seek the best commercially available small arms weapon on today’s market.”
Col. Doug Tamilio, Project Manager Soldier Weapons, hosted the full day event in which a panel of acquisitions experts and program managers addressed approximately one hundred questions put forth by industry – from issues relating to the smallest details to big picture timelines. Col. Tamilio told the audience that the Army expects to release the final “Request for Proposals” (RFP) in May and will give each industry member 90 days to submit their single weapon design that they feel best meets the Army requirement. The competition phase is expected to last two years, although the time frames will vary based upon the number of entrants received and qualified for each phase.
After the completion of the first two test phases, the competition will enter a third “down select” phase where up to three finalists will be awarded contracts to produce limited numbers of test articles. The down select phase will include significant “user in the loop” testing where Soldiers will put the weapons through their paces in a limited user evaluation. The M4A1 will be tested alongside each of the competing designs in order to establish a baseline data set for performance comparison.  After determining the weapon that best meets the requirement, top Army leaders will conduct a business case analysis to determine if it is in the best interest of the Army to procure the winning carbine, and if so, what the ultimate fielding plan would be. Combined, there are currently about 1.1 million M16s and M4s in the Army inventory.
Regardless of the outcome, the combat-proven M4/M4A1 Carbine will remain in service for years to come. As part of its dual path strategy, the Army continues to move ahead with its M4 Product Improvement Program (PIP) that includes the conversion of M4s to M4A1s with heavy barrels and ambidextrous controls, the new standard for the Army carbine. Additionally, the Army plans to solicit industry for bolts, bolt carrier assemblies, and forward rail assemblies to determine if overall system performance can be improved.
“We will select a new carbine,” said Col. Doug Tamilio. “The question will be, do we execute the options on the contracts for how many we will buy and that depends upon the results of a business case analysis. We hope that we get the increases in accuracy and reliability to make the decision fairly easy.”
In his closing remarks, Lt. Gen. Phillips reminded the audience of what, ultimately, the key focus must be throughout the process.
“We must continually ask ourselves, what are we doing today for our Soldiers? What will we do tomorrow for our Soldiers to put the best capability into their hands?” said Lt. Gen. Phillips. “Because at the end of the day, that’s going to help save lives, allow Soldiers to complete their mission, and come home safely to their families and friends.”

Apr 12, 2011


Fire Resistant Army Combat Uniform Permethrin from PEO Soldier

Soldiers are issued gear such as body armor, protective eyewear, and helmets to protect them from threats on the battlefield, but now they will get protection against a common enemy from the most basic piece of equipment – their uniforms. The Army is now issuing Flame-Resistant Army Combat Uniforms (FR ACUs) that have been factory-treated with the insect repellent, permethrin, to help protect Soldiers against the annoyance and dangers of biting insects and insect-borne diseases.Permethrin is a synthetic insect repellent that mimics natural compounds found in chrysanthemum flowers. FR ACUs receiving factory treatments of permethrin will be given the designation FRACU-P. Permethrin factory treatment began in 2010.

FR ACUs are just one of the many items we have been developing to improve Soldier survivability, effectiveness, and comfort. As PEO Soldier, we are the Army acquisition agency responsible for developing, procuring, and fielding nearly everything Soldiers wear or carry. Enhancing defenses against biting insects and the spread of dangerous diseases is one example of the Army’s commitment to Soldiers.

“Over the history of warfare, disease and non-battle injury has been one of our biggest sources of casualties and degradation of our combat power,” said COL Peter Benson, U.S. Army Special Operations Command, Command Surgeon. “By protecting Soldiers from these diseases, it keeps more Soldiers in the fight and decreases the burden on the medical care system when deployed.”

Permethrin provides peerless protection from many of the insect-borne illnesses that pose a threat to Soldiers, such as malaria and dengue fever, which are difficult to treat and can be fatal.

“Since the 1990s, the Army has been using various permethrin treated uniforms,” explained LTC Michael Sloane, Product Manager, Soldier Clothing and Individual Equipment. “Now, we actually get the uniform and it already has not only the fire resistant treatment in it, but the additional protection against bugs.”

The pre-treatment of uniforms means one less task for Soldiers as they prepare to deploy and, unlike previous versions, the factory-treated uniforms do not have an unpleasant smell. While permethrin does not provide a 100 percent guarantee that a Soldier won’t be bitten (Soldiers will still need to take precautions, such as maintaining good hygiene and using the insect repellent DEET on their skin), factory treatment of uniforms will provide 70 percent bite protection for up to 50 washes, with a decreasing (but still extremely high) percentage of bite protection thereafter.

Permethrin has the approval of the Environmental Protection Agency (EPA) and is used by civilian companies to make insect-repelling clothing for outdoor enthusiasts. The Army will not be the first to use clothing that is factory-treated with permethrin. The U. S. Marine Corps currently fields uniforms that are factory-treated with permethrin, and the U.S. Military Academy at West Point has a contract with a commercial company that makes clothing and gear with built-in insect repellent.

Soldiers will be required to take certain steps to ensure their uniforms provide the highest level of protection from biting insects. They should not dry-clean their factory-treated permethrin uniforms, since dry-cleaning will greatly reduce the uniform’s bite protection. Soldiers will also need to launder their uniforms separately from civilian clothing. Further care and handling instructions will be on the uniform’s tags.

Apr 10, 2011


XM25 from PEO Soldier

The XM25, Counter Defilade Target Engagement (CDTE) System enables the small unit and individual Soldier to engage defilade targets by providing a 25mm air bursting capability that can be used in all operational environments. The CDTE is a direct-fire, semi-automatic, shoulder-fired, man-portable weapon system. An individual Soldier employing basic rifle marksmanship skills can effectively engage exposed or defilade targets in just seconds.


The system allows the individual Soldier to quickly and accurately engage targets by producing an adjusted aimpoint based on range, environmental factors, and user inputs. The target acquisition/fire control integrates thermal capability with direct-view optics, laser rangefinder, compass, fuze setter, ballistic computer, laser pointer and illuminator, and an internal display. 


The CDTE System reduces the reliance of small units on non-organic assets (mortars, artillery, and air support) and the need to compete for priority of fires when time is critical. In addition to air bursting ammunition, a family of ammunition is being developed to support other missions, which could include armor-piercing and nonlethal scenarios.

Apr 7, 2011

Video of the Week

Fox Company, 2506 Infantry Battalion, Afghanistan



 Capt. David Schultz gives a briefing of an attack by insurgents at his outpost.  The insurgents suffered heavy casualties, estimated at 120 killed, and their defeat provided invaluable information.  The Captain's unit suffered only 5 WIA and all returned to duty shortly.

Mar 20, 2011

Gunshot Detector System for Soldiers in Afghanistan

 
photo PEO Soldier 

Snipers are a threat to our troops in Afghanistan and the U.S. Army will issue them to our troops.  The IGD (Individual Gunshot Detector) is worn on the shoulder and has a display unit attached via a coiled cable
ARLINGTON, Va. (Army News Service, March 14, 2011) — U.S. Army forces in Afghanistan will begin receiving the first of more than 13,000 gunshot detection systems for the individual dismounted Soldier later this month, service officials said.

“We’re really trying to ensure that every Soldier is protected,” said Brig. Gen. Peter Fuller, Program Executive Officer Soldier.

The Individual Gunshot Detector, or IGD – made by QinetiQ North America – consists of four small acoustic sensors worn by the individual Soldier and a small display screen attached to body armor that shows the distance and direction of incoming fire.

The small sensor, about the size of a deck of cards, detects the supersonic sound waves generated by enemy gunfire and instantaneously alerts Soldiers to the location and distance toward the hostile fire, said Lt. Col. Chris Schneider, product manager for Soldier Maneuver Sensors.

“When you get fired on, instead of trying to figure everything out, you will have technology to assist you in knowing what happened and where the shot was coming from,” Fuller said.

The entire IGD system, procured by PEO Soldier and the Army’s Rapid Equipping Force, weighs less than two pounds, Schneider said.

The idea is to strategically disperse the systems throughout small, dismounted units to get maximum protective coverage for platoons, squads and other units on the move, Schneider explained.

Over the next 12 months, the Army plans to field up to 1,500 IGDs per month, he said.

In the future, the Army plans to integrate this technology with its Land Warrior and Nett Warrior systems. These are network-situational-awareness systems for dismounted units, complete with a helmet-mounted display screen that uses GPS digital-mapping-display technology, Fuller said.

“The next thing we want to do is try to integrate this capability with other capabilities; for example, we have Land Warrior deployed in Afghanistan and we’re going to have Nett Warrior coming into the force. How about, if you get shot at, not only do I know where that came from, but others know where it came from because I can network that capability,” said Fuller.

“It’s about how to leverage technology to improve your survivability and situational awareness.”

Feb 28, 2011

Colt Modular Carbine CM901 7.62 x 51mm NATO



In January 31st, 2011 the US Army drafted a request for proposal for the Individual Carbine (IC), a possible replacement for the M-4 carbine now in use.  The goal is to find the best weapon for the best value, which means that they'll look for commercially developed platforms for this process.  It specifies that it must be flexible enough for future "enhancements for accuracy, lethality, reliability, signature suppression, ammunition improvements, maintenance and other weapon/accessory technologies."

With this in mind Colt Defense is debuting the CM901 Colt Modular Carbine, which according to Colt is the "ONLY SYSTEM" to offer a true user-level modularity to go from one caliber to another without tools or for any need to re-zero sights.  This is all done by just swapping uppers in different configurations.  This platform retains all of the familiarity of the old AR/M16 series but with improved ergonomics.

At the heart of the CM901 platform is the lower receiver that accommodates multiple calibers from the 7.62 x 51mm to anything in between the 5.56 x 45mm cartridge by way of a magazine adapter.  It is also compatible with any M4/M16 type upper!  It has several ambidextrous controls, such as the magazine release, bolt hold/release, and fire selector.  Additionally, the buffer tube assembly is compatible with both calibers, and available for customization with aftermarket stocks and pistolgrips common to the AR/M16 family.  The military/law enforcement version is capable of fully automatic fire.

The upper receiver is similar to the 6940/6941 monolithic upper Colt introduced a few years earlier.  It is a one piece monolithic upper with a full length picatinny rail with sides and bottom rails to mount additional accessories.  It also has a brass deflector and bolt-assist.  In addition, it comes standard with an adjustable folding front sight and a MATECH rear back-up iron sight.

The 7.62 x 51mm version is available in 13 or 16 inch barrel and operates in the gas direct impingement system, which according to Colt is as reliable as any piston system.  However, for the 5.56 x 45mm upper we are introduced to the all new Colt APC (Advanced Piston Carbine), which is a proprietary system that is supposed to be superior to other piston based AR's.  The 5.56 x 45mm is available in 10.3, 14.5, or 16 inch barrel.  Other improvements include hardened steel inserts in high wear areas of the aluminum alloy upper receiver.   Also, a new Advanced Bolt material and newly designed extractor and extractor spring to improve the bolt for longevity and reliability.

Well, we've been waiting a long time to see if Colt would ever respond to all those who've been demanding a better M4 Carbine.  And the CM901 is Colt's answer, it's an interesting one: piston and direct-impingement!  Personally, I like it, especially the dark earth anodizing on it, it just looks cool and hip, which is what sells these days.  But aside from that, Colt did a great job with rearranging the controls and putting a system that may just beat the others.  So, is the CM901 revolutionary?  Nah, more like evolutionary, everything feels so familiar; in my book that's good.  Time will tell if it'll make the cut as the next IC.  If not, it'll do well for civilians as Colt will release it by the end of this year with many calibers, including 6.8 SPC.  Job well done Colt!


CM901 7.62mm (14.5" Barrel) Specifications:


Caliber:  7.62x51mm NATO
Dry Weight:  9.4 lbs
Extended Length:  37.5"
Collapsed Length:  34.25"
Barrel Length:  16" (13" optional)
Barrel Type:  Forged, heavy barrel
Bore:  Chrome, 4 grooves, 1-12" twist, RH
Method of Operation:   Gas, direct system, locking bolt
Ambidextrous:  Yes, magazine release, bolt catch/release, fire selector switch, charging handle
Muzzle Velocity:  2,770fps
Effective Range:  700 meters
Front Sight:  Adjustable folding front
Cyclic Rate of Fire:  700-950 rpm
Fire Control:  Safe, semi, auto
Upper Receiver:  Flat top, monolithic upper receiver
Safe Maximum Operating Chamber Pressure:  70,000 PSI max
Accuracy Specification with M118:  Sub 2 MOA
Accuracy Specification with M118LR:  Sub 1 MOA


CM901 5.56mm (16" Barrel) Specifications:

Caliber:  5.56x45mm NATO
Dry Weight:  7.5 lbs
Extended Length:  35.25"
Collapsed Length:  32"
Barrel Length:  14.5", (10.3", 16" optional)
Barrel Type:  Broached, heavy barrel
Bore:  Chrome, 6 grooves, 1-7" twist, RH
Method of Operation:   Gas, Advanced Colt Piston
Ambidextrous:  Yes, magazine release, bolt catch/release, fire selector switch, charging handle
Muzzle Velocity:  2,785fps
Effective Range:  500 meters
Front Sight:  Adjustable folding front
Cyclic Rate of Fire:  700-950 rpm
Fire Control:  Safe, semi, auto
Upper Receiver:  Flat top, monolithic upper receiver
Safe Maximum Operating Chamber Pressure:  66,000 PSI max
Accuracy Specification with M855:  Sub 4 MOA